Skip to main content

How to Warm Up a New Sending Domain (Without Landing in Spam)

· 9 min read
PostBeagle Team
Email Marketing Experts

You set up a new domain for your email, or moved your store's newsletter to a new platform, and the first big send went badly: a chunk of it landed in spam, Gmail slowed you down, or orders from the campaign never showed up. Your list didn't change, and neither did your content. What changed is that mailbox providers had never seen mail from that domain before, and a sudden wave of email from a stranger looks a lot like spam.

Warming up fixes that: start small, with the people most likely to welcome your email, and grow the volume over a few weeks while providers learn that your mail is wanted. Here's how.

Why a new domain needs warming up​

Gmail, Outlook and Yahoo decide where your email goes partly on reputation: the history of how their users have treated mail from you. Most of that reputation is tied to your domain, the one in your From address and your DKIM signature, and some of it to the IP addresses your mail leaves from.

A new domain has no history. Providers don't punish that, but they're cautious. If the first thing they see is 20,000 messages in an hour, they'll slow you down with "try again later" responses, filter some of it to spam, or both. If they first see a few hundred messages that people click and don't report, they start to trust you.

You need to warm up when:

  • You're sending from a brand-new domain or subdomain.
  • You've switched email platforms. Your domain keeps its history, but your mail now leaves from different servers.
  • Your domain hasn't sent bulk email in months. Old reputation fades.
  • You're on a new dedicated IP. You're warming the IP as well as the domain, so go slower.
  • You're about to send far more than usual, like a Black Friday campaign to customers you rarely email. Providers react to a sudden jump in volume the same way.

If your new domain needs to carry Black Friday or holiday sales, start now. A warm-up takes a few weeks, and it can't be rushed in the last few days.

Step 1: Set up authentication before you send anything​

Warming up an unauthenticated domain is wasted effort. Before the first email goes out:

  1. Publish DKIM for the exact domain you'll send from, using the key your email platform gives you. This is the record that ties your reputation to your domain.
  2. Add your platform to SPF. You can only have one SPF record per domain, so merge the new include: into your existing record rather than adding a second one.
  3. Publish DMARC, starting at p=none with a rua= address so you get reports. Once your reports look clean, you can tighten it later. Our guide on moving DMARC from p=none to p=reject covers that.
  4. Send from an address on the domain you authenticated, with a reply-to address someone actually reads. People replying to you is a good sign, not a nuisance.
  5. Make unsubscribing easy. Include a visible unsubscribe link in every marketing email, and check that your platform adds the List-Unsubscribe header with one-click unsubscribe (RFC 8058). Both Google's sender guidelines and Yahoo's sender best practices expect it from bulk senders. PostBeagle adds the one-click header to every campaign and automation email for you.

You can check SPF, DKIM and DMARC for any domain with the free PostBeagle deliverability checker. It doesn't need an account.

If the domain was registered last week, put a real website on it first. A domain with nothing behind it and a sudden burst of bulk mail looks like a throwaway.

Step 2: Start with your most engaged people​

Who gets your first sends matters more than how many. Your first sends should go to the people most likely to click, reply or buy, because that's the evidence providers are collecting.

Build a "warm-up" segment of subscribers who, in the last 30 to 90 days:

  • Clicked a link in one of your emails,
  • Bought from your store, or
  • Signed up recently and confirmed their address.

Don't pick them by opens. Apple Mail Privacy Protection loads emails on the reader's behalf, so an "open" often doesn't mean a person looked. Clicks and orders do.

Leave out long-quiet subscribers, old imports you've never mailed, and any address you can't vouch for. That's where bounces and complaints come from, and early on a few of them weigh heavily. If your list has a long quiet tail, see how to remove inactive subscribers before you add them back in.

Step 3: Ramp up send by send​

Grow the volume gradually, and only when the last send looked healthy. There's no official schedule from Gmail or Yahoo, so treat this as a starting point, not a rule. For a store with around 15,000 subscribers, sending every two or three days:

SendWho gets itRoughly how many
1Clicked or bought in the last 30 days500
2Same group, a bit wider1,000
3Clicked or bought in the last 60 days2,000
4Clicked or bought in the last 90 days4,000
5Add recent sign-ups and older buyers8,000
6Your full engaged list15,000

That takes about two to three weeks. A smaller list gets there sooner. A larger one, or a new dedicated IP, needs more steps and more time.

A few rules that matter more than the exact numbers:

  • Roughly double at most from one send to the next.
  • Send your strongest content, like a sale customers wanted or a best-sellers roundup. Save experiments for later.
  • Keep a steady rhythm. A send every few days beats three in one day and then nothing for two weeks.
  • Spread each send out. Hundreds of messages over an hour look calmer to a provider than the same messages in a minute. In PostBeagle you can pick gradual sending at the send step to spread a campaign over hours, and mail goes out paced separately for Gmail, Microsoft and Yahoo, backing off when one of them asks.

Step 4: Check the signals after every send​

Before each step up, look at what the last send did:

  • Bounces. Hard bounces mean bad addresses in that segment. Remove them.
  • Spam complaints. Even a handful in a small send is worth stopping for.
  • Deferrals. Lots of "try again later" from one provider means it isn't ready for more volume.
  • Where it lands. Put a few of your own Gmail, Outlook and Yahoo addresses in every send and see whether they reach the inbox or spam.
  • Clicks and orders. If they're far below normal for that audience, the mail may be going to spam.
  • Google's numbers. Once you're sending real volume to Gmail, Google Postmaster Tools shows your domain's spam rate as Gmail users report it.

In PostBeagle, reputation monitoring tracks your bounce and complaint rates. On the default Standard policy it pauses sending automatically if bounces go over 5% or complaints over 0.1%, so a bad segment can't keep damaging a new domain while you aren't looking.

When something goes wrong​

If a send shows a jump in bounces, complaints, deferrals or spam placement, don't push on with the schedule:

  1. Stop increasing volume. Repeat the last healthy step, or go one step back.
  2. Find the cause. It's usually the newest slice of the list: an old import, a segment with stale addresses, or people who don't remember signing up.
  3. Fix it, then resume. Remove the bad addresses, tighten the segment, and pick the ramp up again from where things looked fine.

Losing a week here is far cheaper than months repairing a domain's reputation.

After the warm-up: keep it warm​

Reputation follows your recent behavior, so a warm domain can cool off again:

  • Send on a regular schedule instead of going quiet for months and then mailing everyone.
  • Ramp up before big seasonal sends rather than tripling your volume on the day.
  • Re-check authentication when you add a tool. A new helpdesk or invoicing app that sends as your domain can quietly break SPF or DMARC.

Things that don't work​

  • Warming up with a bought or scraped list. It produces the bounces and complaints you're trying to avoid, when they hurt most.
  • Warm-up services that trade mail between networks of inboxes. That isn't your customers engaging, and it tells you nothing about how your real list will respond.
  • Switching domains to escape a bad reputation. The same list and the same habits earn the same reputation. Fix the cause first.

Quick checklist​

  • DKIM, SPF and DMARC (p=none with reports) published
  • From address on that domain, one-click unsubscribe in place
  • Warm-up segment built on clicks, orders and recent sign-ups
  • Ramp planned: at most double per send, every few days, each send spread out
  • Bounces, complaints, deferrals and seed inboxes checked before each step up

If you're setting up a new domain anyway, PostBeagle's domain setup guide walks through the DKIM, SPF and DMARC records. Every email gets one-click unsubscribe automatically, and you can warm the domain up with gradual sending, click-based segments and automatic pausing on bad bounce or complaint rates. You can start free, no credit card needed. And if a campaign is already landing in spam, start with why emails go to spam and how to fix it.